IBM TOKEN-RING PCI FAMILY ADAPTER, Руководство пользователя

Страница: 40 / 113

DOS Novell NetWare Requester (16-bit)
Note: It is recommended that you use LAN Client (Client32) whenever possible as
an efficient solution.
The 16-bit DOS Novell NetWare Requester environment supports access to servers
running Novell NetWare 3.11 or higher.
To install the IBMTRPO.EXE ODI driver on a DOS computer, perform the following
steps:
Note: Consult your Novell NetWare documentation for instructions regarding how
to create the NetWare Client for DOS and MS Windows diskettes.
1
Create a diskette containing the extracted files from the DOSODIP.EXE file
on the IBM Token-Ring PCI Family Adapter CD-ROM.
2
Insert the NetWare Client for DOS and MS Windows Disk 1 into the
appropriate drive.
3
At the command prompt, type X:, where X is your drive letter, and then press
Enter.
4
Type install and then press Enter.
5
Follow the instructions as they appear. In step 5, select the driver for your
network board. Scroll down through Network Boards, highlight Other
Drivers; then press Enter.
6
Insert the CD-ROM or the diskette that you created in step 1 into the
appropriate drive. When prompted, specify the location to the chosen media
and press Enter. Specify the path as A:\NOVELL\DOS (or at
X:NOVELL\DOS for the CD-ROM version).
7
Highlight your adapter and press Enter.
8
At this time you can change the default parameters. When you finish making
any desired changes, press F10. Appendix G, “Novell NetWare DOS ODI
Driver Parameters” contains the parameters that can be configured in the
NET.CFG file.
9
Follow the instructions presented to finish the installation.
Note: If source routing is required, edit the STARTNET.BAT file that is in the
client directory (usually C:\NWCLIENT) and add the following line after the
IPXODI statement:
C:\NWCLIENT\ROUTE
10
Shut down and restart your computer for all changes to take effect.
11
Check for the following conditions to determine whether the adapter is
working correctly and whether installation has been completed successfully:
¹
The device driver files load successfully. There are no error messages.
If error messages are displayed or if you do not see messages that
3-18
IBM Token-Ring PCI Family Adapter