IBM SAN512B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 242 / 286

1. Install the hinges.
2. Install the latch.
3.
Align the lower hinge pin on the front door with the hinge. Partially insert the
pin into the hinge.
4. Align the upper hinge pin with the hinge. Lower the door into position.
5. Adjust the latch so that the door is latched securely.
Step 8. Check the customer's ac power source
Before you plug the power cord into the ac power source, perform the following
checks on the customer's ac power source.
DANGER
If the receptacle has a metal shell, do not touch the shell until you
have completed the voltage and grounding checks. Improper wiring
or grounding could place dangerous voltage on the metal shell. If
any of the conditions are not as described, STOP. Ensure the
improper voltage or impedance conditions are corrected before
proceeding. (D003)
CAUTION:
Ensure the building power circuit breakers are turned off
BEFORE you
connect the power cord(s) to the building power. (C023)
1. Have the customer turn off the branch circuit breaker for the ac power outlet
into which the power cord will plug. Attach a “Do Not Operate” tag
(S229–0237) to the circuit breaker switch.
SJ000659
Latch Mounting Screws
Door Removed for Clarity
Latch
Hinge Mounting Screws
Hinges
Door
Figure 69. Attaching the front door
218
SAN512B-6 Installation, Service, and User Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|