IBM SAN512B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 269 / 286

Power consumption (maximum configuration)
The maximum power consumption configuration features fans at maximum speed
and the FC32-48 blade installed with optics. Traffic is at full-line rate, smallest
packet is 64-bytes, 40°C (104°F) ambient temperature, and maximum power for all
supported optics. Does not include the power draw for the SX6 extension blade.
Model name
@100 VAC
input @200 VAC
input @-48 VDC
input
Minimum
number of
power
supplies
Notes
SAN256B-6 2438 W
8322 BTU/hr
2385 W
8139 BTU/hr
N/A 2 for AC low
line (100–120
VAC)
1 for AC high
line (200–240
VAC)
Device ships
with 2 power
supplies. One
provides
system
power, but
both must be
installed to
provide
power
efficiency and
redundancy.
SAN256B-6
fully loaded:
2 CP blades,
2 CR blades,
4 FC32-48
port blades, 2
fan
assemblies
SAN512B-6 4339 W
14810
BTU/hr
4244 W
14485
BTU/hr
N/A 3 for AC low
line (100–120
VAC)
2 for AC high
line (200–240
VAC)
Device ships
with 3 or 4
power
supplies. Two
provide
system
power, but 3
or 4 must be
installed to
provide
power
efficiency and
redundancy
SAN512B-6
fully loaded:
2 CP blades,
2 CR blades,
8 FC32-48
blades, 3 fan
assemblies
Power consumption (modules)
For blades in the following table:
v Idle: blade enabled, chips initialized, no optics, ports disabled.
v Nominal: blade enabled, optics in 50% of ports, passing line rate.
Appendix B. Product specifications
245