IBM SAN256B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 95 / 292

The following illustrations show examples of QSFP to QSFP and QSFP breakout cables.
1. QSFP MPO connector
2. SFP connectors
DANGER
Use only optical transceivers that are qualified by IBM and comply with the FDA Class 1 radiation
performance requirements defined in 21 CFR Supchapter I, and with IEC 60825 and EN60825.
Optical products that do not comply with these standards might emit light that is hazardous to the
eyes.
For Class 1M transceiver specifications, refer to Appendix B, “Product Specifications,” on page 231.
For current information on qualified transceivers supported by this device, refer to the Fibre Channel
Transceiver Platform Support Matrix and Transceiver Module Resources at www.brocade.com. These resources
include transceiver data sheets.
Port and extension blade transceivers
FC SFP+ transceivers installed in port blades and extension blade ports provide connections to devices on
FC fabrics. The FC ports on Extension blades support Fibre Channel Routing Services (FCRS) The
following figure illustrates a FC SFP+ transceiver. A separate fiber optic cable plugs into the transceiver.
1. QSFP quad connector
Figure 28. QSFP to QSFP standard cables
Figure 29. QSFP to SFP breakout/cables
Installing Transceivers and Cables
67
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|