IBM SAN256B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 153 / 292

Core Routing Blades
This topic provides the following information:
v “Core routing blade overview”
v “Precautions specific to the blade” on page 129
v “Faulty core routing blade indicators” on page 130
v “Removing a core routing blade” on page 131
v “Installing a core routing blade” on page 132
v “Verifying blade operation” on page 133
Core routing blade overview
Two CR32-4 core routing blades are installed in device slots 5 and 6. Core routing blades contain ASICs
that allow switching between up to four port blades. Core routing blades connect to port blades through
Fibre Channel backplane ports. Each core routing blade provides 96 backplane ports for port blade
connection. Each core routing blade also has 32 front-end ports that are mapped to 8 QSFP transceivers
on the blade's front panel. These transceivers can create ICL connections for up to nine separate switches
in a full-mesh topology and 12 switches in a core-to-edge topology. Each transceiver provides four 32
Gbps FC links for a total of 128 Gbps per connection. This core routing blade is compatible only with the
SAN256B-6.
Core routing blades contain the following LED indicators:
v Green blade power LED
v Amber blade status LED
v Bicolor green/amber QSFP port status LEDs
For details on interpreting LED operation, refer to “Interpreting core routing blade LEDs” on page 90.
CR32-4 port numbering
The following illustration shows how ports are numbered and port trunking groups are arranged on the
blade.
1 - QSFP ports 4-7 (right to left)
2 - QSFP ports 0-3 (right to left)
3 - Map of ports 2, 3, 6, and 7
4 - Map of ports 0, 1, 4, and 5
Figure 56. CR32-4 core routing blade port numbering
© Copyright IBM Corp. 2018
125