IBM SAN256B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 17 / 292

DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.
DANGER
If the installation requires a different power cord than the one supplied with the
device, make sure you use a power cord displaying the mark of the safety agency that
defines the regulations for power cords in your country. The mark is your assurance
that the power cord can be used safely with the device.
DANGER
Disconnect the power cord from all power sources to completely remove power from
the device.
Laser dangers
DANGER
All fiber-optic interfaces use Class 1 lasers.
DANGER
Use only optical transceivers that are qualified by IBM and comply with the FDA
Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with
IEC 825 and EN60825. Optical products that do not comply with these standards might
emit light that is hazardous to the eyes.
DANGER
Laser Radiation. Do Not View Directly with Optical Instruments. Class 1M Laser
Products.
Safety labels
As an added precaution, safety labels are often installed directly on products or product components to
warn of potential hazards. These can be either danger or caution notices, depending upon the level of the
hazard.
The actual product safety labels may differ from these sample safety labels:
Safety and environmental notices
xvii