IBM Power System LC921 9006-12P, Руководство по обслуживанию

Страница: 50 / 132

Figure 31. Inserting a PCIe adapter into position 2 or 3 of the PCIe riser
b) If you are inserting a storage drive adapter, using your labels, connect the signal cables to the
adapter before inserting the PCIe adapter riser into the system.
c) Place the PCIe adapter riser and the PCIe adapters it contains into the system backplane as shown
in the following figure.
1) Ensure that the PCIe holder release pins (B) are retracted, such that the arrows point towards
the system.
2) Use the alignment pins (A) and slots to help you properly insert the PCIe riser cards.
3) Reset the PCIe holder release pins (B) to secure the PCIe adapter riser.
36 Power Systems: Servicing the IBM Power System LC921 (9006-12P)