IBM Power System AC922 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 138

background image

Form factor

Short, low-profile (FC EC2R)
Short, with full-height tailstock (FC EC2S)

Attributes provided

RDMA over Converged Ethernet (RoCE)
Dual port 10 Gb Ethernet network connectivity
Supports 10 Gb Ethernet SFP+ connectivity
Supports 10 Gb SFP+ SR connectivity with a 10 Gb optical transceiver (IBM

®

P/N 77P9336, purchased

separately)
AIX

®

Network Installation Management (NIM) support

PCI Express 3.0 (up to 8 GT/s) x8
PCIe Gen 3.0 compliant, 1.1 and 2.0 compatible
IEEE 802.3ae (10 Gb Ethernet), IEEE 802.3ad (Link Aggregation and Failover), IEEE 802.3az (Energy

Efficient Ethernet), IEEE 802.1Q/P (VLAN Tagging), IEEE 802.10au (Congestion Notification), IEEE

802.1Qbg, IEEE 802.3Qaz D0.2 (ETS), IEEE 802.1Qbb D1.0 (PFC), IEEE 1588v2 (PTP)
Jumbo frame support up to 9.6 KB
VXLAN and NVGRE Overlay Network offload support
TCP/UDP/IP stateless offload
TCP/UDP checksum offload
TCP segmentation offload
PowerVM SR-IOV support

Cables

For 10 GbE, IBM

®

offers Direct Attach Copper (DAC) cables up to 5 M. SFP based transceivers are

included on each end of these cables. For more information about adapter cabling, see the “Cable and

Transceiver information” on page 26.

Transceivers

IBM

®

qualifies and supports SFP+ optical transceiver (FC EB46) to install into the adapter. Customers

can also use their own optical cabling and SFP+ optical transceiver for the other end. The 10 Gb

optical transceiver is capable up to 300 M through the OM3 cable or 82 M through OM2 cable. Either

one or both of the adapter’s two SFP+ ports can be populated.

Cable and Transceiver information
Use multimode fiber optic cables with shortwave lasers that adhere to the following specifications:
• OM3 or OM4: Multimode 50/125 micron fiber, 2000 MHz x km bandwidth
• OM2: Multimode 50/125 micron fiber, 500 MHz x km bandwidth
• OM1: Multimode 62.5/125 micron fiber, 200 MHz x km bandwidth
Because core sizes are different, OM1 cables can only be connected to other OM1 cables. For best

results, OM2 cables must not be connected to OM3 or OM4 cables. However, if an OM2 cable is

connected to an OM3 or OM4 cable, the characteristics of the OM2 cable apply to the entire length of the

cables. The following table shows the supported distances for the different fiber optic cable types at

different link speeds.

26 Power Systems: Installing the System and Ordered Parts for the IBM Power System AC922 (8335-GTX)

«
...
38
39
40
41
42
...
»

Содержание Power System AC922











































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power System AC922

Бренд: Patton electronics Страницы: 121

Бренд: ONELAN Страницы: 24

STRATOS S400-X44E

Бренд: Quanta Computer Страницы: 251

RS/6000 7043 260

Бренд: IBM Страницы: 322

Бренд: IBM Страницы: 100

Бренд: TYAN Страницы: 77

Бренд: AXIOMTEK Страницы: 76

Бренд: Sun Microsystems Страницы: 121

PRIMERGY Econel 230R S1

Бренд: Fujitsu Страницы: 53

Primergy ECONEL 100 S2

Бренд: Fujitsu Страницы: 8

PRIMERGY Econel 200 S2

Бренд: Fujitsu Страницы: 65

PRIMERGY MX130 S1

Бренд: Fujitsu Страницы: 85

PRIMERGY Econel 100

Бренд: Fujitsu Страницы: 64

Бренд: Fujitsu Страницы: 105

Бренд: Fujitsu Страницы: 142

PRIMERGY GX2460 M1

Бренд: Fujitsu Страницы: 251

PRIMERGY MX130 S2 Upgrade and maintenance manua

Бренд: Fujitsu Страницы: 256

Primergy RX100 S2

Бренд: Fujitsu Страницы: 275

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды