IBM InfoPrint 20, Руководство пользователя

Страница: 99 / 206

Ethernet Menu Item Value Description
TCP/IP ON*
OFF Turns TCP/IP communications on or off.
v
ON—enables TCP/IP communications.
v
OFF—disables TCP/IP communications.
Note: If TCP/IP is OFF, the following menu items do not appear: IP
ADDRESS, SUBNET MASK, GATEWAY ADDRESS, BOOTP, and
DHCP.
IP ADDRESS nnn.nnn.nnn.nnn Specifies the printer’s IP address. Consult your network or LAN
administrator before changing this value. See “Chapter 9.
Configuring Printer Network Addresses” on page 141 for more
information.
Note: This menu item appears only when TCP/IP is ON.
SUBNET MASK nnn.nnn.nnn.nnn Specifies the printer’s subnet mask. Consult your network or LAN
administrator before changing this value. See “Chapter 9.
Configuring Printer Network Addresses” on page 141 for more
information.
Note: This menu item appears only when TCP/IP is ON.
GATEWAY ADDRESS nnn.nnn.nnn.nnn Specifies the IP address of the default gateway. Consult your
network or LAN administrator before changing this value. See
“Chapter 9. Configuring Printer Network Addresses” on page 141 for
more information.
Note: This menu item appears only when TCP/IP is ON.
BOOTP IFNO ADDR*
ON
OFF Specifies whether the Ethernet network interface card sends bootp
requests to the server to have an IP address assigned to the printer.
v
IFNO ADDR—specifies that the Ethernet network interface card
sends bootp requests only if the address is not already set at the
printer.
v
ON—specifies that the Ethernet network interface card sends
bootp requests.
v
OFF—specifies that the Ethernet network interface card should
not send bootp requests.
Notes:
1. This menu item appears only when TCP/IP is ON.
2. The number of bootp requests is determined by a setting on the
Ethernet network interface card; the default is three.
DHCP IFNO ADDR*
ON
OFF Specifies whether the Ethernet network interface card sends DHCP
requests to the server to have an IP address assigned to the printer.
v
IFNO ADDR—specifies that the Ethernet network interface card
sends DHCP requests only if the address is not already set at
the printer.
v
ON—specifies that the Ethernet network interface card sends
DHCP requests.
v
OFF—specifies that the Ethernet network interface card should
not send DHCP requests.
Notes:
1. This menu item appears only when TCP/IP is ON.
2. The number of DHCP requests is determined by a setting on the
Ethernet network interface card; the default is three.
NETWARE ON*
OFF Turns Netware communications on or off.
v
ON—enables Netware communications.
v
OFF—disables Netware communications.
Chapter 6. Operator Panel Menus
89