IBM InfoPrint 20, Руководство пользователя

Страница: 141 / 206

5. Replace the paper tray.
6. Make sure you update your printer driver to indicate which trays (Tray 2 and/or
Tray 3) have been removed.
The Envelope Tray
This section describes how to install and remove the envelope tray. See “Selecting
Paper and Other Printable Material” on page 25 for information about acceptable
envelope sizes for the envelope tray.
Installing the Envelope Tray
Use the following procedure to install the envelope tray:
1. Remove the 500–sheet paper tray from the printer and store it for future use.
2. Unpack the envelope tray.
Note: Save the packing material for future use.
3. Slide the envelope tray into the paper tray support unit until it clicks into place.
4. See “Loading Envelopes into the Envelope Tray” on page 41 for instructions on
loading envelopes and postcards into the envelope tray.
5. Make sure you update your printer driver to indicate the envelope tray has been
installed.
Note: Many applications allow you to specify the input tray and envelope size
you want to use. These values will override any value set at the printer.
Removing the Envelope Tray
Use the following procedure to remove the envelope tray:
1. Remove the envelope tray from the printer and store it for future use.
2. Slide the 500–sheet paper tray into the printer until it clicks into place.
3. Make sure you update your printer driver to indicate the envelope tray has been
removed.
The 2000-Sheet Input Drawer
This section describes how to install and remove the 2000-Sheet Input Drawer. The
InfoPrint 20 sits on top of the 2000-Sheet Input Drawer. The 2000-sheet input
drawer option consists of:
v
An input drawer unit mounted on casters
v
Two skids that fit around the casters
v
A power cable to connect the 2000-Sheet Input Drawer to the printer
Chapter 8. Installing Printer Options
131