IBM InfoPrint 20, Руководство пользователя

Страница: 85 / 206

Memconfig Menu
Item Value Description
PCL SAVE OFF*
ON Specifies whether or not the printer saves PCL5e information
(downloaded fonts, macros, patterns) when it switches from PCL5e
to another data stream:
v
OFF—the printer does not save data.
v
ON—the printer saves data.
Note: Changing the PCL SAVE item causes the printer to restart.
Therefore, IBM recommends you wait until no jobs are queued
before you change this item.
PS SAVE OFF*
ON Specifies whether or not the printer saves PostScript information
(downloaded fonts, macros, patterns) when it switches from
PostScript to another data stream:
v
OFF—the printer does not save data.
v
ON—the printer saves data. This option appears only when your
printer has enough memory installed. See “Memory
Requirements” on page 4 for more information about memory
requirements.
Note: Changing the PS SAVE item causes the printer to restart.
Therefore, IBM recommends you wait until no jobs are queued
before you change this item.
Parallel Menu
Use the Parallel Menu to define how the printer handles communications over the
parallel attachment. The following table describes the settings you can change from
the Parallel Menu. An asterisk (*) next to a value in the table indicates the factory
default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
2. If you are unfamiliar with using the operator panel to work with menus, please
read “Using the Operator Panel Keys” on page 16 and “Navigating Menus” on
page 17 before continuing.
Parallel Menu Item Value Description
PERSONALTY AUTO*
PCL
PS Specifies how the printer treats jobs it receives over the parallel
attachment.
v
AUTO—the printer determines if the data stream is PCL5e or
PostScript and handles it accordingly. This is the recommended
value.
v
PCL—the printer treats all data streams as PCL5e.
v
PS—the printer treats all data streams as PostScript.
BI-DI ON*
OFF Turns bi-directional communications over the parallel attachment on
or off.
v
OFF—the printer receives messages from the host, but does not
send messages back.
v
ON—the printer receives and sends messages to the host.
Chapter 6. Operator Panel Menus
75
|