IBM InfoPrint 20, Руководство пользователя

Страница: 21 / 206

4. To power on the printer, press the 1 on the power switch.
5. The printer displays the message WARMING UP... while it warms up (this
usually takes a little longer than a minute). When the printer is ready, it displays
the message READY.
Selecting a Language
Important!
English is the default language for messages and menus. If you use English,
skip this procedure.
To display messages and menus in a language other than English, do the following:
1. Press the Online key once; you see OFFLINE in the message display area.
2. Press the Menu key until you see LANGUAGE MENU in the message display
area. Then press the Item key until you see LANG=ENGLISH.
3. Press the Value key until you see the language you want to select.
4. To change the value, press the Enter key. An asterisk appears next to the
language you select, indicating that it is now active.
5. Press the Online key to make the printer ready. You see the READY message
in the language you selected.
Connecting the Parallel Cable
Important!
You need to supply the parallel cable; it is not included with the InfoPrint 20.
The parallel cable must be IEEE Std 1284-1994 compliant (IBM part number
63H1956 or its equivalent). To order a parallel cable or other optional feature,
contact your IBM Authorized Dealer or IBM Sales Representative. To install
the following optional network interface cards, see “Network Interface Cards”
on page 117:
v
IBM Network Card for Ethernet (10Base2/10BaseT)
v
IBM Network Card for Token Ring
v
IBM Twinax SCS Interface
v
IBM Coax SCS Interface
Chapter 2. Installing Your Printer
11