IBM Flex System x440 Compute Node Скачать руководство пользователя страница 236

Страница: 236 / 584

Restore data from backup.

806f060d-0403ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 3 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0403ffff or 0x806f060d0403ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Check IMM log for Predictive Fault (PFA) or other hard drive messages to help identify failing drive(s).

Replace the hard disk drives that are indicated by a lit status LED on the drive.

Recreate the array.

Restore data from backup.

806f060d-0404ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 4 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0404ffff or 0x806f060d0404ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Replace the hard disk drives that are indicated by a lit status LED on the drive.

Recreate the array.

Restore data from backup.

806f060d-0405ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 5 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0405ffff or 0x806f060d0405ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

806f060d-0403ffff • 806f060d-0405ffff

224

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Содержание Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Flex System x440 Compute Node

Отзывы:

Похожие инструкции для Flex System x440 Compute Node

Бренды по названию

Популярные бренды

IBM Flex System x440 Compute Node, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Flex System x440 Compute Node

Отзывы:

Похожие инструкции для Flex System x440 Compute Node

Бренды по названию

Популярные бренды