IBM EXP15, Инструкция по установке и эксплуатации

Страница: 46 / 124

Before you begin
Ÿ
Read “Handling Static-Sensitive Devices.”
Ÿ
If you have data stored on the drives, label the drives before
you remove them. You must replace the drives in the exact
slots from which you removed them.
Handling Static-Sensitive Devices
Static electricity, though harmless to you, can seriously damage
expansion unit components or options.
Note: When you are adding an internal option, do not open the
static-protective package containing the option until you are
instructed to do so.
When you handle options and other expansion unit components,
take these precautions to avoid damage from static electricity:
Ÿ
Limit your movement. Movement can cause static electricity to
build up around you.
Ÿ
Always handle components carefully. Never touch any exposed
circuitry.
Ÿ
Prevent others from touching components.
Ÿ
When you are installing a new option, touch the static-protective
package containing the option to a metal expansion-slot screw
or other unpainted metal surface on the expansion unit for at
least two seconds. (This reduces static electricity from the
package and from your body.)
Ÿ
When possible, remove the option and install it directly into the
expansion unit without setting the option down. When this is
not possible, place the static-protective package that the option
comes in on a smooth, level surface and place the option on it.
Ÿ
Do not place the option on the expansion unit's covers or any
metal surface.
20
IBM Netfinity EXP15 Installation and User's Handbook