IBM eserver 630 6C4, Руководство по обслуживанию

Страница: 301 / 573

To do a one-time boot of the network adapter attached to the NIM server network, do
the following:
1. Exit to the SMS Main screen.
2. Select Select Boot Devices.
3. Select Install or Boot a Device.
4. On the Select Device Type screen, select Network.
5. Set the network parameters for the adapter from which you want to boot.
6. Exit completely from SMS.
The system starts loading packets while doing a bootp from the network.
Follow the instructions on the screen to select the system console.
If
Diagnostics Operating Instructions Version x.x.x
is displayed, standalone
diagnostics have loaded successfully.
If the AIX login prompt is displayed, standalone diagnostics did not load. Check the
following items:
v
The bootlist on the client may be incorrect.
v
Cstate on the NIM server may be incorrect.
v
There may be network problems preventing you from connecting to the NIM server.
Verify the settings and the status of the network. If you continue to have problems, refer
to “Boot Problems/Concerns” on page 150 of the
pSeries 630 Models 6C4 and 6E4
Service Guide and follow the steps for network boot problems.
Chapter 6. Loading and Using Online and Standalone Diagnostics
281