IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части

Страница: 95 / 290

.1/
Tab
.2/
Adapter retention latch
.3/
Adapter
.4/
Adapter retention cover
10. Install the adapter:
a. Carefully grasp the adapter
.3/
by its top edge
or upper corners, and align it with the expansion
slot on the I/O board.
Attention
When you install an adapter in the server,
be sure that it is completely and correctly
seated in the connector. Incomplete
insertion might cause damage to server
components or the adapter.
b. Press the adapter
firmly into the expansion slot.
c. If you are installing a full-length adapter, close
the adapter retention cover
.4/
.
d. Lower the tab
.1/
over the adapter. Rotate the
adapter retention latch
.2/
until it snaps in place
(the locked position).
11. If you have not already done so, connect any cables
to the adapter.
12. Enable the PCI slot from the operating system. Make
sure that the Power On light
.5/
for the PCI slot is
on.
Attention
If the installed adapter is not supported by the
hot-plug capability of the operating system, shut
down and restart the server.
Netfinity 8500R - Type 8681
87