IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части

Страница: 143 / 290

1. Remove all media (diskettes or CDs) from the drives;
then, turn off the server and all attached options.
Danger
Electrical current from power, telephone, and
communication cables is hazardous.
To avoid a shock hazard:
Ÿ
Do not connect or disconnect any cables or
perform installation, maintenance, or
reconfiguration of this product during an
electrical storm.
Ÿ
Connect all power cords to a properly wired
and grounded electrical outlet.
Ÿ
Connect to properly wired outlets any
equipment that will be attached to this
product.
Ÿ
When possible, use one hand only to
connect or disconnect signal cables.
Ÿ
Never turn on any equipment when there is
evidence of fire, water, or structural damage.
Ÿ
Disconnect the attached power cords,
telecommunications systems, networks, and
modems before you open the device covers,
unless instructed otherwise in the installation
and configuration procedures.
Ÿ
Connect and disconnect cables as described
in the following table when installing,
moving, or opening covers on this product or
attached devices.
2. If you have a modem or fax machine attached to the
server, disconnect the telephone line from the wall
outlet.
3. Unplug all power cords (cables) from electrical
outlets.
4. Note the location of the remaining cables and cords;
then, disconnect them from the back of the server.
To Connect:
1. Turn everything OFF.
2. First, attach all cables to
devices.
3. Attach signal cables to
connectors.
4. Attach power cords to
outlet.
5. Turn device ON.
To Disconnect:
1. Turn everything OFF.
2. First, remove power cords
from outlet.
3. Remove signal cables from
connectors.
4. Remove all cables from
devices.
Netfinity 8500R - Type 8681
135