IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части, Страница: 230 / 290

System management codes
The following page contains the system management
codes. These codes are displayed on the front panel.
Notes
1. See “System error log” on page 32 for instruction
for viewing the error log. Check for additional
information on all system managements codes.
2. To reset the system mangement adapter,
shutdown the system and remove the power for
30 seconds.
3. Some of these codes will automatically be
cleared once the problem is corrected. Others
will need to be cleared manually. To ensure you
have correctly identified the failing FRU during
your diagnosis, manually clear any messages
from the front panel display using the scroll and
enter buttons on the right side of the front panel
after you have replaced any FRU(s). This can be
done with the system in the Standby mode
before power up. Then, once you boot the
system, if a problem still exists which normally
generates a message on the front panel, the new
message generated will alert you to the
continued or new error condition.
Table 16 (Page 1 of 5). System Management
Codes
Code/Description FRU/Action
00
(POST failed) 1. See the system error log and
follow the instruction for the
error in the log.
2. See “Undetermined problems” on
page 211.
01
(POST warning) 1. See the system error log and
follow the instruction for the
error in the log.
08
(Application
failed) 1. See the system error log and
follow the instruction for the
error in the log.
09
(Application
warning) 1. See the system error log and
follow the instruction for the
error in the log.
10
(Boot failed) 1. Try to reboot the system.
2. See system error log for other
possible errors.
3. See “Undetermined problems” on
page 211.
18
(Operating
system failed) 1. Restart the server.
222
Netfinity Server HMM