IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части

Страница: 166 / 290

daughterboard; then, remove the processor
daughterboard from the processor housing assembly.
7. Remove the new processor daughterboard
.7/
from
its static-protective bag.
8. Align the processor-daughterboard connector with the
keyed connector on the processor controller board.
Note
For the location of the processor-daughterboard
connectors on the processor controller board, see
“Processor-controller board component locations”
on page 140. For a layout of the processor
daughterboard, see “Processor-daughterboard
component locations” on page 143.
9. Firmly press the processor daughterboard
.7/
down
into the keyed connector on the processor controller
board. Push in the center of the board, until the
processor daughterboard is fully seated.
10. Align the processor cage with its tabs over the
corresponding slots on the processor daughterboard.
Match the labels on the processor cage with the
corresponding labels on the fan guard
.9/
; for
example, A1/A1.
11. Firmly press the processor cage down into the slots
on the processor housing assembly, until the
processor cage is fully seated.
12. Squeeze and firmly push the release latches
.1ð/
back into the locked position; then, release.
Attention: Ensure that the release latches are in the
fully locked position.
13. Install processors
.4/
in the desired connectors, as
described in step 3 on page 151 through step 7 on
page 153; then, return here.
14. Install terminator cards
.3/
in the connectors that do
not contain processors. The arrows on the
terminators must face toward the large connector on
the processor housing assembly and away from the
fan guard.
15. If you removed the processor-daughterboard
extraction tool in step 5 on page 157, replace the
processor-daughterboard extraction tool on processor
cage A, behind processor A4. Otherwise, store the
tool in a safe place for future use.
16. Reinstall the processor-cage cover by performing
steps 10 and 11 on page 153.
17. Reinstall the processor housing assembly as
described in “Reinstalling the processor housing
assembly” on page 159.
158
Netfinity Server HMM