IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части

Страница: 67 / 290

Reconfiguring the server and updating
server records:
When you start the server for the
first time after you add or remove an internal option or an
external SCSI device, you might see a message telling you
that the configuration has changed.
Ÿ
Device drivers Some options have device drivers that
you need to install. Refer to the documentation that
comes with the option for information about installing
any required device drivers.
Ÿ
DIMMs If you replaced a defective DIMM, you must
manually enable the DIMM slot in the
Configuration/Setup utility program. In this case, the
system does not automatically access the
Configuration/Setup utility program to enable the
DIMM slot. See “Memory settings” on page 31 for
additional information.
Ÿ
Processors The Netfinity 8500R server comes with at
least one processor installed on the standard
processor daughterboard. If you have installed one
or more additional processors, the server can now
operate as an SMP server. Therefore, you might
need to upgrade the operating system. Refer to the
operating-system documentation for additional
information.
If you replaced a defective processor, you must
manually enable the processor slot in the
Configuration/Setup utility program. In this case, the
system does not automatically access the
Configuration/Setup utility program to enable the
processor slot. See “Processor settings” on page 31
for additional information.
Ÿ
Reconfiguring the server Run the Configuration/Setup
utility program to save the new configuration
information. See “Configuring the server” on
page 18.
Ÿ
Updating server records Record your updated device
and configuration information.
Netfinity 8500R - Type 8681
59