IBM 8500R - Netfinity - 8681, Руководство по техническому обслуживанию аппаратной части

Страница: 89 / 290

supply installation/removal” on page 92 for complete
details on the power supplies.
Attention
To ensure proper server operation, be sure to connect
all three 220 V AC power cords or all three 110 V AC
power cords to the power supplies.
Notes
1. The server also comes with three 220 V AC
power cords for connection to the server rack
power distribution unit (PDU). Refer to
IBM
Netfinity Rack Power Distribution Unit (PDU)
Installation Instructions for additional information
on installing a PDU. See “Installing the server in
and removing the server from the rack enclosure”
on page 96 for additional information on installing
a server rack.
2. Power cords vary by country. For complete
details about power cords for use in your country
or region, refer to “Power cords” in the “Legal
Information” section of this
Server Library or see
http://www.ibm.com/pc/support on the World
Wide Web.
The following illustration shows the power supplies in the
server. The server might differ slightly from this illustration.
.1/
Power supplies: See “Hot-swap power supply
installation/removal” on page 92 for information on
power supply requirements and for instructions on
installing additional power supplies.
Netfinity 8500R - Type 8681
81