IBM 7378, Руководство по диагностике и обслуживанию

Страница: 305 / 362

To install a microprocessor, complete the following steps:
1. Touch the static-protective package that contains the microprocessor to any
unpainted metal surface on the server; then, remove the microprocessor from
the package.
2. Open the microprocessor socket by pressing down on the end of the release
lever, moving it to the side, and slowly releasing it to the open (up) position.
3. Open the microprocessor bracket frame and remove the microprocessor filler,
if one is installed.
Attention:
a. Do not touch the microprocessor contacts; handle the microprocessor by
the edges only. Contaminants on the microprocessor contacts, such as oil
from your skin, can cause connection failures between the contacts and
the socket.
b. Handle the microprocessor carefully. Dropping the microprocessor during
installation or removal can damage the contacts.
c. Do not use excessive force when you press the microprocessor into the
socket.
Chapter 5. Removing and replacing server components
287