IBM 7378, Руководство по диагностике и обслуживанию

Страница: 243 / 362

Removing the virtual media key
To remove the virtual media key, complete the following steps:
1. Read the safety information that begins on page vii and “Handling
static-sensitive devices” on page 151.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables.
3. Unlock and remove the left-side cover (see “Removing the left-side cover” on
page 181).
4. Carefully lay the server on its side so that it is lying flat and facing up.
Note: Be careful and do not drop the server.
5. Rotate the adapter-retention brackets to the open position.
6. Remove any adapters that prevent you from accessing the virtual media key
connector on the system board.
7. Press outward on the retention tab and pull the virtual media key out of the
connector.
Virtual media
key connector
Virtual media
key (front)
Virtual media
key (rear)
Retention
tab
Alignment
bracket
8. If you are instructed to return the virtual media key, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 5. Removing and replacing server components
225