IBM 7378, Руководство по диагностике и обслуживанию

Страница: 240 / 362

Installing the operator information panel assembly
To install the operator information panel assembly, complete the following steps:
1. Touch the static-protective package that contains the operator information
panel assembly to any unpainted metal surface on the server; then, remove
the assembly from the package.
2. Angle the operator information panel assembly so that the edge of the
assembly is in the guide slot.
3. Slide the operator information panel assembly forward until the release latch
clicks into place.
4. Connect the operator information panel assembly cable to the system board
(see “System board internal connectors” on page 15 and “Internal cable routing
and connectors” on page 164).
5. Install the fan cage assembly (see “Installing the fan cage assembly” on page
244).
6. Install the air baffle (see “Installing the air baffle” on page 213).
7. Return the power-supply cage to its closed position (see “Closing the
power-supply cage” on page 156).
8. Install the hot-swap power supply or power supplies (see “Installing a hot-swap
power supply” on page 274).
9. Close the bezel.
10. Install and lock the left-side cover (see “Installing the left-side cover” on page
181).
11. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
222
IBM System x3400 M3 Types 7378 and 7379: Problem Determination and Service Guide