IBM 6H0, Руководство по обслуживанию

Страница: 383 / 561

Table 8. Common Firmware Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
B1xx 8FF0 Informational message No action required. (The data in
these informational log entries may
be used by support personnel to
gather additional debug information.)
The value of word 13 may indicate
which type of informational message
is being generated.
SPCN Informational Codes:
The following values of word 13
indicate an SPCN informational
message: C006, C007, C00C, C030,
C0E0, C0E2, C0F0, and C0F1. No
action is required by the customer or
service representative.
Note: To find the value of word 13:
v
If the system is down, go to the
service processor error log and
find the error log entry containing
B1xx 8FF0. Examine the first two
bytes of word 13 of the detailed
entry.
v
If the system is running, do the
following:
– Examine the AIX error log entry
containing B1xx 8FF0. This is a
FIRMWARE_EVENT error with
an identifier of A6D1BD62.
– In the detail data, find the string
B1xx 8FF0. (If present, it will be
at byte 60 of the detail data.)
– Move forward 8 bytes to bytes
68 and 69; this is the value of
word 13 in the service
processor error log.
B1FD 0013 A firmware update has failed because
the update image is invalid. The
update was aborted before any
changes were made to the currently
installed firmware.
Reset the service processor (by
activating the pinhole reset switch or
by disconnecting, then reconnecting
power). Install a valid firmware
update image for the specific system
type and model.
B1FD 0015 Too many firmware update diskettes
inserted (or wrong or faulty update
image)
1. Assure the firmware update
image is correct for the specific
system type and model
2. Replace the update diskettes with
a new set of firmware update
diskettes.
Chapter 5. Error Code to FRU Index
363