IBM 6H0, Руководство по обслуживанию

Страница: 257 / 561

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
4069 3201 Memory test detected primary I/O
backplane fault
Primary I/O backplane
Location: U0.1-P1
4069 3280 Memory test detected primary RIO
adapter fault
Primary RIO adapter
Location: U0.1-P1.1
4069 3281 Memory test detected primary RIO
port 0 fault
1. Check RIO cable
Location: U0.1-P1.1/Q1
2. Primary RIO adapter
Location: U0.1-P1.1
4069 3282 Memory test detected primary RIO
port 1 fault
1. Check RIO cable
Location: U0.1-P1.1/Q2
2. Primary RIO adapter
Location: U0.1-P1.1
4069 3283 Memory test detected primary RIO
ports fault
Primary RIO adapter
Location: U0.1-P1.1
4069 3284 Memory Test detected PCI controller
PHB0 fault
1. RIO adapter
Location: U0.1-P1.1
2. Primary I/O backplane
Location: U0.1-P1
4069 3285 Memory Test detected PCI controller
PHB1 fault
1. RIO adapter
Location: U0.1-P1.1
2. Primary I/O backplane
Location: U0.1-P1
4069 3286 Memory Test detected PCI controller
PHB2 fault
1. RIO adapter
Location: U0.1-P1.1
2. Primary I/O backplane
Location: U0.1-P1
406A 0001 Self test detected CEC backplane
fault
CEC backplane
Location: U1.1-P1
406A 0003 Self test detected processor fault All processors
Location: U1.1-P1-C1
406A 0009 Self test detected memory fault All memory
Locations:
U1.1-P1-C1
U1.1-P1-M1
U1.1-P1-M2.
Go to “MAP 1540: Minimum
Configuration” on page 113 and run
CEC drawer minimum configuration
to isolate the failing memory
component.
406A 00A0 Self test detected service processor
firmware fault
Update system firmware
406A 00A1 Self test detected system firmware
fault
1. Check for AIX updates
2. Check for system firmware
update
Chapter 5. Error Code to FRU Index
237