IBC CX Series Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 124

IBC CX Series Скачать руководство пользователя страница 72

The controller provides overall management of the boiler operations including:

Power-up, self-diagnostics, easy Load parameter adjustments

Burner operation, safety management systems, call-for-heat
management and load priority

Real time boiler data

Temperature and throttle operation

Maintenance of operational and error service logs

2-way communication between other IBC boilers and controls

Internet connection and communication

Operational and historical data may be accessed from the

Status

menu >

Load Status

>

Load Profiles

and

Load Statistics

screens. Also in the

Status

menu, you can view error logs, including records of all errors since

original power-up complete with the date and time of the error.

4.2 Control interface

The control interface is provided through a color touchscreen display. The touchscreen responds
to a light finger touch on the screen. You can also use a stylus, pencil, or similar device to operate
the touch controls. Do not use a sharp or metallic object such as a screw driver to operate the
control as it could damage the touchscreen.

Prior to any interaction with the touchscreen, the display shows the Home screen details of the
current boiler status. If the controller has been left on the Home screen long enough (user
adjustable, 10 minutes by default) the display dims to save power.

The control automatically returns to the home screen if left unattended. The screens will step back
one screen at a time in 10-minute increments if the touchscreen has not been touched. The pop-
up windows will also step back automatically in 2-minute intervals.

The boiler status bar indicates if the boiler is in a normal, warning or alarm state. When no warning
or alarm state is present, the bar will be green and the time will be displayed inside the green area.
The bar can also be yellow or red corresponding a warning or alarm state. Text inside the bar will
indicate the specific warning or alarm present. If more than one alarm is present the text display
will slowly change, rotating though the alarms that are present.

72

Section: About the boiler controller

«
...
70
71
72
73
74
...
»

Содержание CX Series





























































































































Отзывы:

Нет отзывов