IAI MSCON, Инструкция по эксплуатации

Страница: 229 / 360

3.9
About Gateway Parameter Setting
Tool
221
3) GW mode Select
• Enable SW : Select whether to activate/inactivate the enable switch in
TP.
• BYTE swap : Set the byte swap. [Refer to 3)-1 in this section.]
• WORD swap in D-WORD Data : Set whether to swap the W-word sized data with word size.
[Refer to 3)-2 in this section.]
• Enable SW in AUTO mode : Select whether to activate/inactivate the enable switch in
AUTO mode.
3)-1 BYTE swap: Swap the upper and lower in the sent and received data in byte unit. Set
this considering the connected host system if necessary.
● = ON, ○ = OFF
MSEP
ON/OFF
ON/OFF
ON/OFF
ON/OFF
入力
レジスタ
16
進
データ
16
進
データ
16
進
データ
16
進
データ
MSEP
RWwnn
PLC
：
RWrnn
出力
レジスタ
MSCON
Input
register
MSCON
Output
register
Hexadecimal
data
Hexadecimal
data
Hexadecimal
data
Hexadecimal
data
ME0306-2A