IAI EC ELECYLINDER EC-GD4 Скачать руководство пользователя страница 108

Страница: 108 / 208

4-3

perat

ion

ELECYLINDER test operation

Touch [Simple Data Setting].

The screen will switch to the Simple Data Setting window.

  If the position edit password is set to a value other
  than "0000", the password input screen will be
  displayed.

However, if the operating mode is not [Monitor mode],

the Message screen will be displayed.

Switch to Monitor mode by following the displayed instructions.

If the position edit password is set to a value other
than "0000", enter the password and press
the [ENT] key on the touch panel.

The screen will switch to the Simple Data Setting window.

The position edit password is set to "0000" at shipping.
Refer to the teaching pendant manual (ME0355) for information
about changing the password.

Touch the [Homing] button.

The ELECYLINDER returns to the home position.

After home return operation completes,

the [BEnd] and [FEnd] buttons will appear.

Action

4.2 Teaching tool connections and testing operation

Action

Reference

Содержание EC ELECYLINDER EC-GD4
















































































































































































































Результаты поиска

Содержание EC ELECYLINDER EC-GD4

Отзывы:

IAI EC ELECYLINDER EC-GD4, Инструкция по эксплуатации, Страница: 108 / 208

Результаты поиска

Содержание EC ELECYLINDER EC-GD4

Отзывы: