i3 International Veo16i Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 96

i3 International Veo16i Скачать руководство пользователя страница 67

System Setup > Storage Settings

Revision: 180906

Veo16i User Manual

Page | 66

>

CAPACITY: Shows hard drive capacity

>

MODEL: Shows hard drive model. Make sure to use only

Western Digital drives.

>

S.M.A.R.T. STATUS: Reads and displays the disk current S.M.A.R.T information.
- NORMAL: The hard disk is healthy and is being used.
- CHECK: Hard disk error was detected. The hard disk is not being used for recording. Check
the hard drive cable connection. If the status does not change to NORMAL, replace the hard
drive.
- ERROR: The hard disk has failed and is not being used. Check all cable connections. If the
status does not change to NORMAL, replace the hard drive.

When done, click

CLOSE

or press [

EXIT

] on the remote control.

Disk Operations

<SYSTEM SETUP> - <STORAGE> - <DISK OPERATIONS>

>

DISK WRITE MODE: Set to OVERWRITE or ONCE.
When set to OVERWRITE (default), the video data will be written to the drive based on the first-
in-first-out principle, with new data overwriting old data.
When set to ONCE, the video recording will stop as soon as the hard drive becomes full. Then
the video recording will stop and the pre-set event alarm will sound indicating that the hard drive
needs to be changed.

>

RECORDING TIME LIMIT: If the recorded video data may not be retained for longer than a
specified period of time for legal or other reasons, set the maximum length of time that the video
may be retained on the hard drive. This option is disabled by default.
Set to HOUR, DAY or WEEK and enter maximum number of selected time units. The maximum
retention length can be set to 3 months. Note that the video data will be erased from the drive
after the set time duration even if there is sufficient disk space.

>

DISK FORMAT: Format the selected hard drive.

IMPORTANT:

Fisk formatting PERMANENTLY erases all recorded video data and logs. Video data

cannot be recovered after disk format.

Click

APPLY

to save new configurations.

When done, click

CLOSE

or press [

EXIT

] on the remote control.

«
...
65
66
67
68
69
...
»

Содержание Veo16i

































































































Отзывы:

Нет отзывов