i3 International Veo16i Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 96

i3 International Veo16i Скачать руководство пользователя страница 2

Veo16i 16-channel Embedded DVR

COPYRIGHT © 2018 by i3 International, Inc. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including but not limited to, photocopying, recording, or by any information storage or
retrieval system, without the prior written permission of the copyright owner and the publisher.
Annexxus is a registered trademark of i3 International Inc.

Disclaimer

This user manual is provided as is, without warranty of any kind, expressed or implied, including but not
limited to performance, merchantability, or fitness for any particular purpose. Neither i3 International Inc.
nor its dealers or distributors shall be liable to any person or entity with respect to any liability, loss, or
damage, caused or alleged to have been caused directly or indirectly by this information.
Furthermore, i3 International Inc. reserves the right to revise this publication, and to make changes to the
content at any time, without notice.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.

Address:

i3 International Inc.
780 Birchmount Road, Unit 16
Toronto, ON M1K 5H4
Canada

Contact us:

Tech Support: 1.877.877.7241
Email:
[email protected]
Web Site:
www.i3international.com

«
1
2
3
4
...
»

Содержание Veo16i

































































































Отзывы:

Нет отзывов