7
Rev.
141203
i3-TRNG-CAMS-
Ax73RM
.indd
3.2 Disassembling the Camera
Before mounting and adjusting the camera, follow these steps to disassemble the
camera.
7. Dome bubble housing / Dome cover
8. Screws securing the dome bubble
housing to camera module (x3, silver)
9. Lexan bubble
10. 3/4” Top conduit hole. During installation, sealant must be used to maintain the
IP66 status.
11. 3/4” Side conduit hole. During installation, sealant must be used to maintain the
IP66 status.
1. U
se the provided security Torx key to loosen
three screws securing the dome bubble housing
to camera module (#8). Do not completely
remove the screws from the dome bubble.
Lift the dome bubble off and set aside.
Locking
arms (x2)
2. Next, loosen three silver screws
attaching camera to the back
box.
3. Remove camera’s back box and
set aside.