28
i3-TRNG-CAMS-
73RM
.indd
Rev.
141203
2592 x 1944 - 5MP (Recommended),
QXGA (2048 x 1536) - 3MP, 1080P
(1920×1080), SXGA (1280×960, 720P (1280×720), or SVGA (800×600).
•
Frame Rate: Set the frame rate for the recorded video to 1,
3 (Recommended)
,
7.5, 12, 15 (unavailable with 5MP resolution), or 30 fps (unavailable with 3MP
and 5MP resolution)
•
Max Bit Rate (for H264 codec): Set the video bit rate within a 50-8000 kbit/s
range.
Recommended
Max Bit Rate value:
2016 kbit/s
•
H264 GOP (for H264 codec): Set the GOP rate within a 1-60 range. GOP value
is automatically adjusted to the same value as the Frame Rate. Lower GOP
number results in a lower compression and larger video size. Higher number
results in a higher compression and smaller video size. GOP rate determines the
i-Frame frequency.
Recommended H264 GOP
value
: 3
•
H264 Rate Control Mode (for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate).
»
VBR
(Variable Bit Rate)
(Recommended)
: This setting will produce
a variable bit rate video stream, however the video quality will remain
constant resulting in high quality video images. Network infrastructure
must be able to provide the set bandwidth to account for bit rate
variations.
•
CBR (Constant Bit Rate): This setting will produce a constant bit rate video
stream at the cost of video quality. The quality may deteriorate considerably
when motion is detected. This setting is beneficial for installations with limited
bandwidth.
•
Quality (for MJPEG codec only): HIGH, MID, LOW
Network settings:
•
DHCP: Enable or Disable to have the network automatically assign an IP address
to the camera.
•
IP Address: Manually enter the camera’s IP address here.
This option should NOT be used if DHCP is enabled.
•
Subnet Mask: Manually enter the camera’s Subnet Mask here.
This option should NOT be used if DHCP is enabled.
•
Default Gateway: Provide the IP address of the network’s router if necessary.
Contact your network administrator for this information.
•
DNS: Specify a DNS if necessary.
Contact your network administrator for this information.
•
Physical Address: This is the camera’s unique MAC Address. It cannot be
changed.