background image

30

i3-TRNG-CAMS-

73RM

.indd

Rev. 

141203

6.2.1 Dual-Streaming Setup Recommendations

i3’s Annexxus cameras support triple streaming, however, only two streams 
are being utilized by the SRX-Pro Server. Video settings for each stream can be 
configured separately.

Primary stream (Stream 1) is used for video recording and for Full-Screen live video 
display. Secondary stream (Stream 2) is used for remote video streaming and 
for split-screen mode live video display. SRX-Pro Server allows recording of both 
Primary and Secondary (sub-stream) video streams. i3 International recommends 
using Primary Stream to record the highest-resolution video image for identification 
purposes, and setting the secondary stream to lower-resolution, higher fps settings 
to facilitate faster remote video streaming. This combination of recommended video 
settings conserves and prolongs video storage, while taking advantage of high-
resolution video images.

Recommended Video Settings for the Primary Stream (Stream 1):

Video Codec: H264
Resolution: Highest resolution offered by the camera.
Frame Rate: 1-3 fps, based on customer preference and camera’s available 
frame rate options.

Recommended Video Settings for the Secondary Stream (Stream 2):

Video Codec: H264
Resolution: 4CIF (704x480)
Frame Rate: 7-10 fps, based on customer preference and camera’s available 
frame rate options.

Recommended Video Settings for the Third Stream (Stream 3):

If using exclusively with SRX-Pro Server, disable Third Stream by selecting 

None

” from the 

Resolution

 drop-down menu.

If also recording video to SMTP or FTP Server directly from the camera, use 
recommended settings below:
Video Codec: MJPEG
Resolution: 4CIF (704x480)
Frame Rate: 12 fps, or based on customer preference.

Содержание Ax73RM
























































Отзывы: