35
Rev.
141203
i3-TRNG-CAMS-
Ax73RM
.indd
6.3 Motorized Lens Setup
Motorized tab allows controlling the motorized lens of the Annexxus 73RM camera
by manually adjusting focal length and focus of the lens.
•
Zoom Limit: Set Zoom Limit to X3 to use optical zoom only. Set to X30 to use
digital zoom.
•
Speed: Set lens adjustment speed to LOW, MEDIUM, or HIGH. Speed setting
will determine how quickly the lens reacts to the setting commands.
•
Zoom In/Out: Click the
In
or
Out
buttons respectively, to Zoom
in or out. When in Live mode, use Zoom In/Out icons on the PTZ
Controls panel to control focal length of the lens.
•
Manual Focus: Click the
Near
or
Far
buttons respectively to adjust the
lens focus. Ax73RM’s motorized lens will re-focus the lens
automatically, but focus can also be adjusted manually if
needed. When in Live mode, use Focus Near/Far icons on the
PTZ Controls panel to controls lens focus manually.
•
Reset the camera to the default Zoom position & Auto-Focus: Press
Calibrate
to
return the camera’s lens to its default focal length and auto-focus.
6.4 Alarm/Motion (optional)
Alarm/Motion setup tab allows configuring camera’s “edge” motion detection.
Note that this feature is
not
supported by the SRX-Pro Server. To detect motion on
Ax73RM camera, configure Motion detection in the SRX-Pro Server’s motion tab.
“Edge” motion detection, (motion detection performed by the camera itself, rather
than SRX-Pro Server software), can be useful as a backup method of recording.
Video recording based on camera’s “edge” motion detection can be recorded to a
microSD card.