37
Rev.
141203
i3-TRNG-CAMS-
Ax73RM
.indd
6.4.2 Alarm Input/Output Setup
•
Digital Input: Enable or Disable Digital Input (Alarm In / Sensor). See
Section
3.3 I/O Connectors
for information on how to connect an Alarm Input to the
camera.
•
Active Type: Set the sensor’s type to Normally Open or Normally Closed as
per sensor device specifications. (Normally Closed contact will carry electricity
until it is activated; Normally Open contact will not carry electricity until it is
activated).
•
Digital output: Set the Digital Output (Alarm Out / Control) to ON or OFF. See
Section 3.3 I/O Connectors
for information on how to connect an Alarm Output
to the camera. Digital Output must be set to ON to be used in conjunction with
“edge” motion detection.
•
Output Active Type: Set to High or Low. High is equivalent to Normally Open
relay, Low is equivalent to Normally Closed relay.
•
Duration: Set the Digital Output (Control) Duration/Dwell time to 1, 5 or 10
seconds.
After making any setting adjustments, remember to click the
Save
button
to save any changes made.
6.5 Privacy Zone (optional)
In the Privacy Zone setup tab, select an area that needs to be blocked off with
a rectangle on Live View and from video recording because of privacy or other
concerns. Up to 5 separate Privacy Zones can be configured.
•
Color Setting: Select between BLACK, GREY and WHITE to determine what
color will be used to block out the configured privacy zone.
