51
Rev.
141203
i3-TRNG-CAMS-
Ax73RM
.indd
Restart/Reset:
•
Click
Restart Camera
to restart your Annexxus-series camera. This will
cause a temporary disconnect, no video will be recorded while the camera is
restarting but all custom settings will be saved. Camera restart is required after
the firmware update. After clicking, a pop up will appear asking you to confirm.
Click
Yes
.
•
Click
Factory Reset
to return all settings, except for the Networking (IP)
settings to factory defaults. After clicking, a pop up will appear asking you to
confirm. Click
Yes
.
•
Click
Hard Factory Reset
to return all camera settings, including IP address,
to factory defaults. After clicking, a pop up will appear asking you to confirm.
Click
Yes
.
Note:
Your Network Camera’s default IP address is
192.0.0.16
and the
default Subnet mask address is
255.255.255.0
.
System Information > Configuration Settings:
•
Click
Export File
to export your camera’s settings. If you have multiple
cameras of the same model and you would like to apply a set of customer
settings to each one, exporting the configuration file may save time.
•
Click
Browse
to locate a configuration file to apply new settings to your
camera and click
Import File
.
After making any setting adjustments, remember to click the
Save
button
to save any changes made.
