All type
Page
2/5
Fuel Injection Timing
Maintenance Procedure
연료
분사
시기
정비점검
절차
Section No.
M35400
Rev.
1A
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 08.05/RSK
8.
상기 6항에서 읽은 전 실린더 연료 분사 시기의 평
균값은 해당 엔진의 연료 분사 시기 대표 값이라 할
수 있다.
8. Normally their average value is considered as
the representative fuel injection timing of the
engine.
Fig.4 Read flywheel scale from TDC
(TDC와 플라이휠 눈금 간격을 읽는다)
Fig.2 Remove deflectors from FIP
(연료 분사 펌프로부터 디플렉터 분해)
Fig.3 See a light through two deflector
holes by using a mirror.
(거울을 이용 두 개의 디플렉터 구멍을 통하여 나
오는 빛을 확인한다)
light
mirror
Fig.1 Remove fuel oil through a plug hole at end
block(item no. 109)
(엔드블럭의 플러그를 풀어 파이프 내 연료를 제거한다)