Freedom 38 PPA
Service Manual
809010
33
1 – Troubleshooting
This system requires a 12 VDC battery with a capacity of 750 cold cranking amperes (CCA).
If the battery is severely discharged, the alternator may not be able to fully recharge the battery, even after jump-starting.
In this case, fully charge the battery to the correct voltage with a battery charger (with the engine turned off), or install a
new battery. See
Always dispose of old batteries in compliance with local and national regulations.
WARNING!
RISK OF FIRE OR EXPLOSION – WEAR PROTECTIVE CLOTHING
Turn OFF the engine before performing any battery checks or maintenance.
Avoid contact with sulfuric acid from the engine’s battery. It can cause serious injury
if it comes in contact with eyes or skin.
Always wear protective glasses, gloves, and clothing when servicing the battery.
Wash your hands thoroughly after touching the battery and its connectors.
Examine the battery regularly to make sure:
All electrical connections are clean and secure. Loose connections can cause
sparks that result in a fire. See Check the battery and cable connectors on
page 69.
None of the electrical wires are frayed. Replace any frayed wires before starting
the engine.
When the battery is charged or discharged, an explosive chemical change occurs.
Avoid all conditions that can ignite this explosive gas:
Keep any open flames or sparks away from the top of the battery.
Do not smoke cigarettes near a battery that is being charged.
Never place a metal object across the battery’s terminal posts to check its
charging status. Instead, use a voltmeter or hydrometer.
Never charge a frozen battery.
Never charge a battery in an enclosed room that lacks proper ventilation.
Never disconnect any charging unit circuit or battery circuit cable from the
battery while it is being charged. Doing so can produce dangerous sparks.
Apply the cable connections correctly if you jump-start the battery. Attach the
negative (-) ground cable last, and remove it first.
Always dispose of old batteries in compliance with local and national regulations.
Examine the chassis ground strap connection regularly. Without a solid ground
strap connection, electrical discharge can damage the engine and electrical system.
Содержание Freedom 38 PPA
