HYDAC ELECTRONIC ENS 3000, Руководство по эксплуатации

Страница: 59 / 103

ENS 3000 IO-Link 7
Edition: 2020-04-20
HYDAC ELECTRONIC GMBH
Part No.: 669898
4.5 Organisational measures

The user manual must always be kept accessible at the place of use of the measuring
system.
 In addition to the user manual, generally applicable legal and other binding accident
prevention and environmental protection regulations must be paid attention to and must
be mediated.
 The respective applicable national, local and system-specific provisions and
requirements must be paid attention to and mediated.
 It is mandatory for the operator to inform personnel on special operating features and
requirements.
 The personnel instructed to work with the measuring system must have read and
understood the user manual, especially the
chapter 4 Security
, prior to commencing
work.
 The nameplates and any prohibition or instruction symbols applied on the measuring
system must always be maintained in a legible state.
 Repairs may only be undertaken by the manufacturer or a facility or person authorized
by the manufacturer.
5 Functions of the ENS 3000
Depending on the model, the instrument has the following functions:
 Supports IO-Link specifications V1.1 and V1.0
 Supports SIO mode

Display of the switching states in SIO mode
 Mode display (SIO or SDCI)
 Adaptation to the corresponding application using specific parameter settings
 Display of the actual fluid level in cm or inch
 Display of the actual temperature in °C or °F

Display of the minimum and maximum value of fluid level or temperature or of a
pre-set switch point
 Switching of the switching outputs based on the fluid level or temperature and the
pre-set switch parameters
 Analogue output

Program enable