Husqvarna 450 Rancher, Руководство по ремонту, Страница: 280 / 708

G.24 Part. N. 8000 A5911 (03-2006)
REVISIONE MOTORE
ENGINE OVERHAULING
REVISION MOTOR
MOTORUEBERHOLUNG
REVISIÓN DEL MOTOR
Accoppiamento cilindro-pistone
Diametro cilindro
Effettuare la misurazione del diametro interno (Dc), con l’ausilio di un
micrometro per diametri interni, alla distanza “A” dalla sommità di 20 mm
(250cc) o 10 mm (400-450-510 cc).
Diametro pistone
Rilevare il diametro del pistone (Dp) alla distanza “B” di 6 mm (TE-TC 250), 8
mm (SMR 400), 9 mm (TC 450-510), 10 mm (TE-SMR 450) o 11 mm (TE-
SMR 510) dalla base. Il gioco di accoppiamento risulterà = Dc-Dp.
Cylinder piston fitting
The cylinder and piston are supplied matched; if by chance cylinder liners
and pistons become mismatched then measure their diameters as follows:
Cylinder bore
Use an internal micrometer (Dc) and take the reading at “A” distance from
the top 0,80 in. (250cc) or 0.39 in. (400-450-510 cc).
Piston diameter
Take the piston diameter (Dp) at “B” distance of 6 mm/0.24 in. (TE-TC 250), 8
mm/0.31in. (SMR 400), 9 mm/0.35 in. (TC 450-510), 10 mm/0.39 in. (TE-SMR
450) o 11 mm/0.43 in. (TE-SMR 510) from the top. The clearance is = Dc-Dp.
Accouplement cylindre-piston
Diamètre chemise-cylindre:
Effectuer la mesure du diamètre intérieur (Dc), avec le secours d’un
micromètre pour intérieurs, à la distance «À» de la sommité de 20 mm
(250cc) ou 10 mm (400-450-510 cc).
Diamètre du piston
Mesurer le diamètre piston (Dp) à la distance “B” de 6 mm (TE-TC 250), 8 mm
(SMR 400), 9 mm (TC 450-510), 10 mm (TE-SMR 450) ou 11 mm (TE-SMR
510) de la base. Le jeu d’acouplement sera = Dc-Dp.
MODELLO GIOCO (Dc-Dp) LIMITE DI SERVIZIO
MODEL CLEARANCE (Dc-Dp) WEAR LIMIT
MODÈLE JEU (Dc-Dp) LIMITE DE SERVICE
TE, TC 250 0,020÷0,046 mm 0,10 mm
(0.00079÷0.00181 in.) (0.004 in.)
SMR 400
TE, SMR 510 0,025÷0,061 mm 0,12 mm
(0.001÷0.0024 in.) (0.0047 in.)
TC 450-510 0,025÷0,055 mm 0,12 mm
(0.0010÷0.0022 in.) (0.0047 in.)
TE, SMR 450 0,020÷0,055 mm 0,10 mm
(0.00079÷0.0022 in.) (0.004 in.)