M.36
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
H11415
1
3
2
A
H11416
H11417
A
H11418
ELECTRICAL SYSTEM
Workshop Manual Ed. 07-2012
Digital instrument, warning lights (TE)
The motorcycle is equipped with a digital instrument; on the instrument are
located 3 warning lights too: high beam, blinkers and fuel reserve.
1- BLUE warning light “HIGH BEAM”
2- GREEN warning light “BLINKERS”
3- ORANGE warning light “Fuel reserve”
The dashboard is activated only after the engine has been started.
NOTES:
- Every time the engine is started, the dashboard shows the SW version for the
first 2 seconds; after the check routine, the dashboard shows the last planned
function.
- A few seconds after the engine has been turned off, the dashboard is deac
-
tivated.
- To select the instrument functions and to set to zero the functions, use the
SCROLL knob (A).
The instrument functions are the following, as shown below.
1- SPEED / ODO
2- SPEED / CLOCK
3- SPEED / TRIP
4- SPEED / CHRONO
5- SPEED / HOUR COUNTER (H)
1- SPEED / ODO
.................
1- SPEED (km/h or mph) / ODO
To change unit from kilometres to miles or miles to kilometres, proceed as follows:
1) with the engine off, press and hold the "SCROLL" button (A), then start the
motorcycle to switch the instrument on.
2) press and hold the "SCROLL" button (A) until the symbol "Km/h" or "Mph
Miles" is displayed, then release.
3) "Km/h" and "Mph Miles" are displayed in alternation - press the "SCROLL"
button (A) again while the desired unit of measurement is displayed.
2- SPEED / CLOCK
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph;
- CLOCK: clock- Reading from 0:00 to 23:59:59;
To reset the clock, push the knob SCROLL (A) for more than 3 seconds in order
to increase the hours; release the knob and then, after 3 seconds, it is possible
to increase the minutes;
