HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 5 / 60

GETTING STARTED
3
■
Fabric-Wrapped Large Cassette Installation Bracket.
This style of installation bracket is used for Skyline
®
units ordered
with the fabric-wrapped large cassette. The brackets are used in
both inside and outside mount applications. The number of
installation brackets required varies based on headrail width, as
shown in the table below.
■
Fabric-Wrapped Cassette Splice Clip. This component is only
provided with Skyline units ordered specifically with a spliced headrail.
This clip joins two pieces of the cassette together. Once installed, a
spliced cassette functions seamlessly as if it were one piece. If you have
not ordered the Skyline unit with a spliced fabric-wrapped large cassette,
you will not receive this component.
■
Fabric-Wrapped Large Cassette Splice Cover. This is the decorative
trim cover over the fabric seam in a spliced fabric-wrapped large
cassette. It will also be used when the fabric is seamed. The fabric
seaming is sometimes necessary to obtain the full width of the
cassette. In this case, the splice cover will be installed by the
fabricator. If you have not ordered the Skyline unit with a fabric-
wrapped large cassette, you will not receive this component.
■
PowerView™ Receiver.
This device is used to receive radio
frequency signals from PowerView ™ control components and
provides a manual control button.
Fabric-Wrapped
Large Cassette
Installation Bracket
Cassette Installation Brackets Required
Shade Width Brackets Required
Up to 36" 2
36 1 /
8
" – 72" 3
72
1
/
8
" – 90" 4
90 1 /
8
" – 120" 5
120
1
/
8
" – 156" 6
156
1
/
8
" – 192" 8
Fabric-Wrapped
Large Cassette
Splice Clip
Fabric-Wrapped
Large Cassette
Splice Cover