HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 31 / 60

INSTALLATION
29
Connect the Receiver (If Not Already Connected)
IMPORTANT: Connect the receiver before connecting the DC
power supply.
■
Plug the 10-pin receiver connector into the motor housing.
CAUTION:
The receiver connector can only be inserted one way.
Do not force the connector into the motor housing.
■
Snap the cover into place over the motor.
■
Plug in the 10-pin receiver connector to the
receiver.
Mount the Receiver
■
Remove the double-sided tape from the back
of the receiver.
■
We recommend mounting the receiver to the
headrail beside the motor.
■
Check that the wire is not caught or pinched in
the mounting brackets or the headrail.
Install the DC Power Supply
CAUTION:
Make sure the PowerView ™ receiver is plugged into the motor before connecting
the DC power supply.
■
Plug the power cable with the barrel
connector from the motor into the
extension cable.
■
Plug the other end of the extension cable
into the DC power supply.
Receiver
Motor
Barrel
Connector
Extension
Cable
DC
Power
Supply
Extension
Cable