HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 46 / 60

OPERATION
44
Operate the Shade
Basic Operation
1. To wake up the remote, simply pick it up or press
■
STOP. The last group(s) selected will be
highlighted and active.
2. Press “all” or groups 1 – 6 to select specific shade(s) to move. Selected group button(s) will
light to show they are selected.
a. Multiple group buttons may be selected at a time.
b. To deselect a group, press the group button again. The backlight for that group button will
go out.
3. Press
▼
CLOSE to close the selected shade(s).
4. Press
▲
OPEN to open the selected shade(s).
5. Press
■
STOP to stop the shade’s movement anywhere along its travel.
6. Press
♥
FAVORITE to send selected shade(s) to your preset “favorite” position. Refer to the
PowerView
™
Remote Motorization Control Guide on how to set a favorite position.
Further Operation and Programming Information
PowerView
™
Pebble
™
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide .
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide .
PowerView App Operation
PowerView Hub is required for PowerView App operation. For information regarding setup
and operation using the PowerView App, refer to the online
PowerView App Software Guide at
hunterdouglas.com/powerview/support
.