HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 6 / 60

4
GETTING STARTED
■
DC Power Supply. The power supply provides DC power to the unit
motor assembly and the receiver. The power supply operates on
power from 100-240 VAC and 47-63 Hz. Each unit needs enough
wire length to allow the DC power supply to reach the wall outlet
nearest the unit or in the least obtrusive location.
■
PowerView
™
Pebble
™
Remote. Remote controls are used
to control the unit. Replacements may be ordered should the
remote control be lost or if an additional remote control is
desired. Unless otherwise ordered, each unit ships with one
remote control and batteries. You may have ordered a Surface
Remote instead of the Pebble Remote.
■
Wire Retainers.
These are used to secure the power cord to
the wall. In some cases, they may also be used to secure the
wire from the receiver to the wall. Both the nail-in and self-
adhesive wire retainers are included.
Optional Components
■
Valance Brackets Inside Mount. The number of valance
brackets will be the same as the number of installation brackets
shown in the table on page 2.
■
Valance Brackets Outside Mount. The number of valance
brackets will be the same as the number of installation brackets
shown in the table on page 2.
DC Power
Supply
Wire Retainers
Metal Valance Brackets
Inside Mount
Metal Valance Bracket
Outside Mount