HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 19 / 60

INSTALLATION
17
Box Valances and Fabric-Wrapped Cassette Installation
■
Refer to the appropriate section below for your valance type:
➤
Metal Box Valance — below
➤
Fabric Box Valance — page 18
➤
Fabric-Wrapped Large Cassette — page 21
Metal Box Valance
■
Assemble the valance using two corners, one return piece, and the front and rear pieces.
See “Product View — Top Treatment Options” on page 7.
Do not put the other return
and corner pieces in place at this time .
IMPORTANT:
The assembled valance serves as a drilling template when mounting the unit
to the ceiling.
■
Install valance hanger clips inside
box valance as shown.
■
Evenly space the intermediate
valance box brackets at 18
"
to
24
"
intervals along the headrail.
DO NOT exceed 24
"
between
valance brackets.
■
Slide the box valance brackets
into the box valance as shown.
Make sure all of the release tabs
on the installation brackets are
positioned away from the valance.
■
Assemble the remaining return and two corner pieces and install them onto the valance.
■
Position the valance assembly where it will be mounted against the ceiling.
■
Use a
3
∕
32
" drill bit, drill the center hole (or near the center) first and install a screw.
CAUTION: Do not mount into drywall, only mount into wood.
■
Install the rest of the box valance brackets and screws.
Proceed to “Mount the Headrail” on page 23.
18"-24"
2"-4"
18-24"
18"-24"
2"-4"
Release tab
positioned
away from
the valance.