HunterDouglas Skyline PowerView, Установка Эксплуатация Уход

Страница: 49 / 60

OPERATION
47
■
Insert the end cap pins back into in the
bottom weight and press into place.
■
Reinstall the fabric panel into
the headrail.
■
Repeat this process for the other panels.
■
Reconnect the bottom weights if
required.
■
Using the button on the receiver or
remote, traverse the shade open and
closed to test for proper operation.
Straighten Panel Fabric from Bottom Weight
If the panel fabric is creased or wrinkled at the bottom it can be adjusted and straightened.
CAUTION:
Some units may not be able to reuse the plastic adhesive strip mentioned in this
process. If the strip will not stick in the new location, contact your Hunter Douglas dealer for a
replacement.
■
Use a small flat-blade screwdriver to
remove the end cap pin in the bottom
weight of the affected panel.
■
Slide out the snap slide end cap from the
bottom weight.
■
Slide the panel out of the bottom weight.
Snap Slide
End Cap
End Cap Pin