Huawei SmartLogger3000 Скачать руководство пользователя страница 145

Страница: 145 / 305

Parameter

Description

Remarks

Maximum apparent

power (kVA)

Specifies the output upper threshold for

the maximum apparent power to adapt

to the capacity requirements of

standard and customized inverters.

If the maximum active

power equals the value of

Smax_limit, this parameter

is not displayed.

Maximum active power

(kW)

Specifies the output upper threshold for

the maximum active power to adapt to

different market requirements.

OFF at 0% power limit

If this parameter is set to Enable, the

inverter shuts down after receiving the

0% power limit command. If this

parameter is set to Disable, the inverter

does not shut down after receiving the

0% power limit command.

Active power change

gradient (%/s)

Specifies the change speed of the

inverter active power.

Derated by fixed active

power (kW)

Adjusts the active power output of the

inverter by fixed value.

This parameter is displayed

if Remote power schedule

is set to Enable.
For 1000 V inverters, the

maximum value of this

parameter for the

SUN2000-25KTL-US is 27.5

kW.

Derated by active power

% (%)

Adjusts the active power output of the

inverter by percentage.
If this parameter is set to 100, the

inverter outputs based on the maximum

output power.

This parameter is displayed

if Remote power schedule

is set to Enable.
If this parameter is set to

100, the inverter outputs

based on the maximum

output power.

Reactive power change

gradient (%/s)

Specifies the change speed of the

inverter reactive power.

Plant active power

gradient (min/100%)

Specifies the rate of active power rise

due to sunlight changes.

Average active power

filtering time (ms)

Specifies the period of active power rise

due to sunlight changes. This parameter

is used with Plant active power

gradient.

PF (U) voltage detection

filtering time (s)

Specifies the time for filtering the grid

voltage in the PF-U curve.

Reactive power

adjustment time (s)

Specifies the adjustment time for the

reactive power to reach the target value

during reactive power adjustment.

SmartLogger3000

User Manual

6 WebUI Operations

Issue 10 (2022-08-20)

133

Содержание SmartLogger3000


















































































































































































































































































































Результаты поиска

Содержание SmartLogger3000

Отзывы:

Huawei SmartLogger3000, Руководство пользователя, Страница: 145 / 305

Результаты поиска

Содержание SmartLogger3000

Отзывы: