Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 5 Installing Cables
Huawei Technologies Proprietary
5-51
-
+
+
-
+
-
+
-
-
+
-
+
+
-
+
-
+
-
-
+
-
+
-
+
(1)
+
-
-
+
-
+
-
+
+
-
+
-
-
+
-
+
-
+
+
-
+
-
+
-
(2)
(1) The front view
(2) The rear view
Figure 5-53
Connecting cables in the extended battery cabinet
2)
Fasten cables with the socket wrench.
3)
Connect cables between the up and down shelves of storage battery modules
according to Figure 5-53.
4)
Fasten cables with the socket wrench.
5)
Connect cables between the front and rear modules of the storage battery
according to Figure 5-53.
6)
Fasten cables with the socket wrench.
7)
Paint the positive and negative terminals of the storage batteries with Vaseline to
make them waterproof.
8)
Cap the terminals for protection.
5.10.3 Installing External Cables of the Battery Cabinet
To install external cables of battery cabinet, proceed as follows:
1)
Insert the four naked cables of the access control and temperature sensor cable to
the corresponding terminals of the sensor. See Figure 5-54.
z
White and green cables are access control sensor cables.
z
Red and black cables are temperature sensor cables.
